Filter
Top Products
Assembling TSX Momentum Components
870 USE 101 00 V.3 97
Section 3.4
Labeling the CPU
Guidelines for Labeling the CPU
Overview A fill-in label is shipped with each I/O base. This label should be placed on the M1
Processor Adapter that you mount on that base.
This section describes the label and provides an illustrated example.
Fill-In Label A completed label provides informon about the assembled module and its I/O field
devices that can be used by service and maintenance personnel.
The model number of the I/O base is marked on the fill-in label directly above the
color code. The cutout area above the I/O model number allows the model number
of the adapter to show through.
Continued on next page
Note: An Option Adapter may also be used in the assembled module. You will
find its model number printed in the upper left corner of Option Adapter
housing.