Filter
Top Products
870 USE 101 00 V.3 345
14
Configuring a Modbus Plus
Network in Concept with Peer
Cop
At a Glance
Purpose Communication transactions over Modbus Plus are defined in Concept 2.1 by a
configuration tool called Peer Cop. This section uses examples to explain how to
use Peer Cop to configure the two types of network architecture:
l An I/O network, where the Peer Cop of the CPU defines all the communication
transactions over the full network.
l A supervisory network with two or more CPUs communicating with each other
and with additional devices on the network.
In This Chapter This chapter contains the following sections:
For This Topic... See Section... On Page...
Getting Started 1 346
Using Modbus Plus to Handle I/O 2 352
Passing Supervisory Data over Modbus Plus 3 363