Configuring an M1 CPU with Concept
302
870 USE 101 00 V.3
Establishing Configuration Extension Memory for Peer Cop, Continued
Procedure From the PLC Configuration screen, follow the steps below to enable Peer Cop and
adjust the amount of Configuration Extension memory:
Continued on next page
Step Action
1 From the Configure menu, select Config extensions OR double-click anywhere in
the Config Extensions region of the screen.
Result: The Configuration Extension dialog box appears.
2 Click the check box next to Peer Cop, then click OK.
Result: Peer Cop status changes from Disabled to Enabled in the PLC
Configuration screen.