870 USE 101 00 V.3 393
B
Run LED Flash Patterns and Error
Codes
Run LED Flash
Pattern and Error
Codes
The following table lists the flash pattern of the Run LED on the TSX Momentum
Processor Adapters. It also lists the associated codes (in hex format).
Continued on next page
Number of Blinks Code (hex) Error
Continuous 0000 Requested Kernel mode
2 080B ram error during sizing
080C run output active failed
082E MB command handler stack error
0835 Main loop broken
0836 Power down / Power holdup
0837 Power down reset absent
3 072B master config write bad