Filter
Top Products
Removal and replacement procedures 16
The system is now without power.
Locating and removing the Torx T-15 tool
Many hardware procedures in the server are toolless, but a few require the removal of Torx T-15 screws that have
been installed for shipping or security reasons. A Torx T-15 tool ships with the server for the removal of these screws.
1. Locate the Torx T-15 tool on the back of the server.
2. Slide the tool upward out of the retaining clips.
Figure 4 Removing the Torx T-15 tool
Extending the server from the rack
1. Loosen the thumbscrews that secure the server to the front of the rack.
Figure 5 Loosening the front panel thumbscrews