Filter
Top Products
Server component identification 62
Table 14 Hot-plug SCSI hard drive LEDs
Item Description Status
3 Fault status On = Drive failure
Flashing = Fault-process activity
Off = No fault-process activity
Table 15 Hot-plug SCSI hard drive LED combinations
Activity LED Online LED Fault LED Status
On Off Off Do not remove the drive. Removing a drive during this process will
cause data loss.
The drive is being accessed and is not configured as part of an
array.
On Flashing Off Do not remove the drive. Removing a drive during this process will
cause data loss.
The drive is rebuilding or undergoing capacity expansion.
Flashing Flashing Flashing Do not remove the drive. Removing a drive during this process will
cause data loss.
The drive is part of an array being selected by the Array
Configuration Utility, or the Options ROMPaq is upgrading the drive.
Off Off Off OK to replace the drive online if a predictive failure alert is received
and the drive is attached to an array controller.
The drive is not configured as part of an array.
-Or-
If this drive is part of an array, then a powered-on controller is not
accessing the drive.
-Or-
The drive is configured as an online spare.
Off Off On OK to replace the drive online.
The drive has failed and has been placed offline.
Off On Off OK to replace the drive online if a predictive failure alert is received,
provided that the array is configured for fault tolerance and all other
drives in the array are online.
The drive is online and configured as part of an array.
On or flashing On Off Do not remove the drive. Removing a drive during this process will
cause data loss.
The drive is online and being accessed.