Filter
Top Products
Removal and replacement procedures 46
System battery
WARNING! This server contains an internal lithium manganese dioxide or vanadium pentoxide battery. A risk
of fire and burns exists if the battery is not handled properly. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose to temperatures higher than 60°C (140°F)
CAUTION: Do not dispose of batteries, battery packs, and accumulators with the general household waste. To
forward them to recycling or proper disposal, use the public collection system or return them to either HP or an
authorized service provider.
To remove the battery:
1. Power down the server. See “Powering down the server” earlier in this chapter.
2. Extend the server from the rack. See “Extending the server from the rack” earlier in this chapter.
3. Remove the access panel. See “Removing the access panel” earlier in this chapter.
4. Locate the battery on the system board.
NOTE: It might be necessary to remove some PCI-X expansion boards to gain access to the battery.
Figure 42 Locating the battery on the system board