Filter
Top Products
Removal and replacement procedures 51
16. Remove the seven cable clips:
a. Lift to disengage the cable clip.
b. Slide the clip forward, and lift it off the chassis.
Figure 47 Removing the cable clips
17. Use the Torx T-15 tool or screwdriver to remove the eight screws that secure the power supply connectors to the
chassis bottom .
18. Remove the cords from the connectors .
19. Remove the connectors from the server .
Figure 48 Removing the power supply connectors
20. Use the Torx T-15 tool or a screwdriver to remove the four screws that secure the AC filter cable assembly to the
rear chassis wall.