Filter
Top Products
4. Contents of simulations
Main
code
Sub
code
Contents Details of operation
Initial
value
Set range
1 1 Mirror unit operation
check
Used to execute scanning at the speed corresponding to the set mag-
nification ratio.
100% 50 ~ 200%
Key operation Display
Changing the magnification ratio:
Fixed magnification ratio key
Set magnification ratio:
Fixed magnification ratio LED
2 Optical system sensor
operation check
Used to check MHPS (Mirror home position sensor) ON/OFF state with
the LED on the operation panel.
Display
<Lighting when the sensor is ON>
MHPS: Paper empty LED
2 1 SPF aging Used to perform SPF document transport.
The paper size is not detected. (Excluding postcards, extra large sheet of
1m or greater.)
With SPF installed: Single transport operation
With RSPF installed: Duplex transport operation
2 SPF sensor operation
check
Used to check sensors in SPF with the LED on the operation panel.
Display
<Lighting at sensor ON>
PW1: JAM LED
PW2: Paper empty LED
PW3: Machine position JAM LED
PW4: SPF JAM LED
PL1: Manual paper feed tray select LED
PL2: Second cassette position JAM LED
P-IN: SPF select LED
P-OUT: Main cassette select LED
3 SPF motor forward
rotation operation check
Used to rotate the SPF motor forward at the speed corresponding to the
currently set magnification ratio for 10 sec.
100% 50 ~ 200%
Key operation Display
Magnification ratio change:
Fixed magnification ratio key
Set magnification ratio:
Fixed magnification ratio LED
4 SPF motor reverse
rotation operation check
Used to rotate the SPF motor reversely for 10 sec.
8 SPF paper feed solenoid
operation check
Used to drive the SPF paper feed solenoid (PSOL) at the cycle of
500msec ON and 500msec OFF 20 times.
9 SPF reverse solenoid
operation check
Used to drive the SPF reverse solenoid (RSOL) at the cycle of 500msec
ON and 500msec OFF 20 times.
10 SPF paper exit gate
solenoid operation check
Used to drive the SPF paper exit gate solenoid (GSOL) at the cycle of
500msec ON and 500msec OFF 20 times.
11 SPF PS release solenoid
operation check
Used to drive the SPF PS release solenoid at the cycle of 500msec ON
and 500msec OFF 20 times.
3 2 Shifter job separator
sensor operation check
Used to check the sensors state in the shifter job separator with the LED
on the operation panel.
Display
<Lighting at sensor ON>
Shifter HP sensor: Machine position JAM LED
Job separator HP sensor: SPF JAM LED
Paper exit full sensor: Second cassette position JAM LED
3 Shifter operation check Used to drive the shifter motor at the speed of printing of A4 (8-1/2 ×
11"). Pressing the start key or the clear all key moves the shifter to the
home position.
Key operation
The shifter is moved to the home position: Start key or clear all key
AR-160/160 FM/E [8] SIMULATION 12/1/1998
AR-161
8 – 2