Filter
Top Products
LOADING PAPER
2-3
2
4
Load paper into the tray.
5
Gently push tray 1 into the machine.
Push the tray firmly all
the way into the
machine.
6
Set the paper type of the paper that was
loaded in the 1st tray.
If you loaded a different type of paper from the
previous paper, be sure to set the new paper type
as explained in "Setting the paper type" (page 2-
11).
7
Changing paper size in paper tray 1 is now
complete.
NOTE
If the size slide position (step 2 of page 2-2) is not set correctly after changing the paper size, or if the paper type
(page 2-11) is not set correctly, incorrect paper selection or paper misfeeding may occur.
ApollonII_general-copy_SEC.book 3 ページ ２００４年９月６日 月曜日 午後４時５７分