Filter
Top Products
LARGE CAPACITY TRAY
3-16
Loading paper in the large capacity tray
1
Pull the tray out until it stops.
When the tray is in
operation, do not use
excessive force to pull
the tray out. This may
damage the tray.
2
Place the paper in the center of the paper
table.
The paper stack must
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (21 lbs.
(80 g/m
2
))
If the paper type was
changed, be sure to change the appropriate
settings as explained in "Setting the paper type
(except the bypass tray)" (See page 2-11).
3
Push the tray firmly all the way into the
machine.
The paper table will
automatically rise to the
paper feed position.
ApollonII_general-copy_SEC.book 16 ページ ２００４年９月６日 月曜日 午後４時５７分