Filter
Top Products
SADDLE STITCH FINISHER
3-5
3
■
■■
■ Saddle stitch function
The saddle stitch finisher can automatically place
two staples for centerline binding of prints or copies
and fold them along the centerline.
■
■■
■ Hole punching (only if a punch module is installed)
If the saddle stitch finisher is equipped with a hole
punch module, printed paper can be hole punched
and delivered to the offset tray. Saddle stitching
and hole punching cannot be selected at the same
time. The automatic image rotation will not function
when the hole punching function is used.
For the allowed paper sizes for punching, see the
specifications on page 3-3.
When using the punch function in copy mode,
place the original with the top toward the inside of
the machine. If the original is not placed in this
orientation, punching will not take place at the
correct positions. (See "Standard original setting
orientation" on page 4-7 of the copy section.)
9
11
7
2
4
6
<Example>
{Original 1} {Punch positions}
{Original 2} {Punch positions}
<Example>
ApollonII_general-copy_SEC.book 5 ページ ２００４年９月６日 月曜日 午後４時５７分