Filter
Top Products
SETTING ORIGINALS
4-7
4
■
■■
■ Standard original setting orientation
Place originals in the
document feeder tray or on
the document glass so that
the top and bottom of the
original is positioned as
shown in the illustration. If not,
staples will be incorrectly
positioned and some special
features may not give the
expected result.
■
■■
■ Automatic copy image rotation - rotation copying
If the orientation of the originals and copy paper are different, the original image will be automatically rotated 90
°
and copied. (When an image is rotated, a message will be displayed.) If a function is selected that is not suitable
for rotation, such as enlarging the copy to greater than 8-1/2" x 11" (A4) size or staple sorting with the saddle
stitch finisher, rotation will not be possible.
[Example]
●This function operates in both the auto paper select or auto image mode. (Rotation copying can be disabled
with a key operator program. See page 15 of the key operator's guide.)
Document feeder tray
Document glass
Top
Bottom
Top
Top
Bottom
Bottom
Top
Bottom
[Example 1]
[Example 2]
Top
Bottom Bottom
Top
Document feeder tray
Document glass
Document feeder tray
Document glass
* When the original is placed as shown in example 2 and stapling is to be performed, orient
the top of the original as shown below.
Orientation of original Orientation of paper Copy after rotation
Face down Face down
ApollonII_general-copy_SEC.book 7 ページ ２００４年９月６日 月曜日 午後４時５７分