Filter
Top Products
CUSTOM SETTINGS
2-14
3
Touch the year, month, day, hour or
minute key, and then use the or key
to adjust the setting.
●If you select a non-existent date (for example, Feb.
30), the [OK] key will gray out to prevent entry of the
date.
●Select [DAYLIGHT SAVING TIME SETTING]
checkbox to have the time automatically change at
the beginning and end of daylight saving time.
4
Touch the [OK] key.
5
To finish the setting operation, touch the
[EXIT] key.
About the settings
■
■■
■ Total count
This displays the following sheet counts:
The number of sheets printed in copy, print, and
fax modes.
The number of sheets transmitted using the fax
function and scanned using the network scanner
function.
The number of sheets used by optional
equipment such as the reversing single pass
feeder and the duplex module of the duplex
module/2 x 500 sheet paper drawer, and the
number of sheets stapled by the saddle stitch
finisher.
In the case of only,
●Each sheet of paper that is 11" x 17" (A3) size or
larger is counted as two sheets.
●Each sheet of paper used for automatic two-sided
copying is counted as two sheets (11" x 17" (A3)
paper is counted as four sheets). (When an optional
duplex module/2 x 500 sheet paper drawer and a
duplex bypass/inverter unit are installed.)
■
■■
■ Display contrast
Screen contrast adjustment is used to make the
LCD touch panel easier to view under various
lighting conditions. Touch the [LIGHTER] key to
make the screen lighter, or the [DARKER] key to
make the screen darker.
■
■■
■ List print
Used to print a list of the settings configured in the
fax, printer and network scanner function.
■
■■
■ Clock adjust
Use this to set the date and time in the machine's
built-in clock. This clock is used by functions that
require date and time information. The format of
the printed date can also be changed.
■
■■
■ Tray settings
The paper type, paper size, enabled modes and
automatic tray switching can set for each tray. See
page 2-11 for details on setting the paper type and
paper size. Automatic tray switching to another
paper tray is used to automatically switch to
another tray with the same size and type of paper
in the event that the paper runs out during
continuous printing. This requires that the trays be
loaded with the same size of paper. To enable any
function, touch the check box key so that a
checkmark ( ) appears.
■
■■
■ Keyboard select
When using the fax function or network scanner
function, you can switch the arrangement of the
letter keys in the display keyboard that appear in
the character entry screen when storing or editing
destinations. Select the arrangement of the letter
keys that you find easiest to use.
The following three alphabet keyboard
configurations are available:
●Keyboard 1 (QWERT... configuration)*
●Keyboard 2 (AZERTY...configuration)
●Keyboard 3 (ABCDEF...configuration)
* The default setting is "Keyboard 1".
(Example: Character entry screen when Keyboard
3 is selected)
CUSTOM SETTINGS
TOTAL COUNT
TRAY SETTINGS
KEYBOARD
SELECT
KEY OPERATOR PROGRAMS
CLOCK
DISPLAY
CONTRAST
ADDRESS
CONTROL
LIST PRINT
EXIT
RECEIVE MODE
FAX DATA
FORWARD
DESTINATION NAME
SPACE
OK
CANCEL
ApollonII_general-copy_SEC.book 14 ページ ２００４年９月６日 月曜日 午後４時５７分