Sharp AR-BC260 All in One Printer User Manual


 
SADDLE STITCH FINISHER
3-3
3
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Staple
Allowed paper sizes for stapling
Upper tray: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5
Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Maximum number of sheets for stapling
See "Staple sort mode" on the next page
Stapling positions
Upper tray: 3 locations (1 position back, 1 position front, 2 positions center)
Lower tray: 4-47/64" (120 mm) pitch from center of paper
Saddle stitch
Maximum of 10 sheets can be stapled (21 lbs. or 80 g/m
2
)
Paper size: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Paper weight: 17 to 28 lbs. or 64 to 105 g/m
2
Power supply Supplied from machine (Stand / paper drawer)
Dimensions
24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H)
(633 mm (W) x 603 mm (D) x 771 mm (H))
Weight Approximately 79.4 lbs. (36 kg)
Overall dimensions when
attached to machine
1432 mm (W) x 676 mm (D)
(56-25/64" (W) x 26-5/8" (D))
(when tray is extended)
Remarks
Paper output
Upper tray: Supports both face-up and face-down output Lower tray: Face-down output only
Paper full detection Both upper and lower tray
Offset function
Upper tray only (offset function not possible for 12" x 18", 5-1/2" x 8-1/2"R, A3W
and A5R size paper)
Paper conveying Center reference
Name Punch module
Hole punching 3 or 2 holes
Allowed paper sizes for
punching
3 holes: 11" x 17", 8-1/2" x 11", A3, A4
2 holes: 8-1/2" x 14", 8-1/2" x 11"R
Power supply Supplied from machine saddle stitch finisher
Dimensions 3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H) (95 mm (W) x 560 mm (D) x 170 mm (H))
Weight Approximately 5.6 lbs. (2.5 kg)
NOTES
Transparency film, envelopes, postcards, and other special papers cannot be stapled.
If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
ApollonII_general-copy_SEC.book 3 ページ 2004年9月6日 月曜日 午後4時57分