Filter
Top Products
LOADING PAPER
2-12
Setting the paper type and paper size in the bypass tray
Follow the steps below to set the type and size of the paper loaded in the bypass tray.
1
Touch the [PAPER SELECT] key.
(When copy mode is selected)
Touch the [PAPER
SELECT] key in the
main screen of the copy
mode.
(When printer mode is selected)
Touch the [PAPER
SELECT] key in the
main screen of printer
mode.
2
Touch the key for the desired paper type.
(When copy mode is selected)
The key for the selected
paper type will be
highlighted.
(When printer mode is selected)
The steps that follow differ depending on the
paper type selected. Follow the steps for the
selected type.
●If you touched [PLAIN], go to step 6.
●If you touched [HEAVY PAPER], go to step 3
●If you touched [TRANSPARENCY], go to step 4.
●If you touched [ENVELOPE], go to step 5.
3
Touch [HEAVY PAPER 1] or [HEAVY
PAPER 2], and go to step 6.
For the types of heavy paper that can be used, see
page 2-10.
4
Touch [SPEED MODE] or [QUALITY MODE]
for the transparency film, and go to step 7.
●SPEED MODE is for fast printing.
●QUALITY MODE is for a high quality image.
5
Touch the type of envelope, and go to step 7.
6
If you inserted a non-standard size of paper
in the bypass tray, remove the checkmark
from "ENABLE AUTO SIZE DETECTION" and
then touch the [EXTRA SIZE] tab.
When the
screen opens, the X key will be highlighted.
Use the and
touch keys to enter the X
dimension. If you inserted a standard size of
paper in the bypass tray, make sure that a
checkmark appears in the [ENABLE AUTO
SIZE DETECTION] checkbox.
Next touch the key to
highlight it and enter the
dimensions for Y.
The permitted range for
the X dimension is 5-1/2
to 17 inches (139 to 432
mm), and the permitted
range for the Y dimension is 4 to 11-3/4 inches
(100 to 297 mm).
7
Touch the [OK] key to complete the setting.
PAPER SELECT
AUTO 8½x11
100%
PAPER SELECT
8½x11
CONDITION
SETTINGS
PAPER SELECT
100%
COPY RATIO
PLAIN
HEAVY PAPER
TRANSPARENCY
ENVELOPE
UTO
EXPOSURE
PAPER SELECT
PLAIN
HEAVY PAPER
TRANSPARENCY
ENVELOPE
CONDITION
SETTINGS
HEAVY PAPER1 28+lbs. 54 lbs.
HEAVY PAPER2 54+lbs. 80 lbs.
SPEED MODE
QUALITY MODE
COM-10
MONARCH
OK
DL
C5
ENABLE AUTO SIZE DETECTION
EXTRA SIZE
BASIC SETTING
X
Y
5 ½
4
(4 11
3/4)
inch
(5
1/2 17)
inch
BASIC SETTING
EXTRA SIZE
OK
ApollonII_general-copy_SEC.book 12 ページ ２００４年９月６日 月曜日 午後４時５７分