Filter
Top Products
Entering and Using Programs
132
Entering and Using Programs
If you frequently perform the same operation involving the same party,
you can program all the steps of the operation into one Program Key.
This allows you to perform the operation by simply pressing that key.
♦
Any Rapid Key which is not already programmed as a Rapid Key or
a Group Key can be used as a Program Key.
♦
You can also include a timer setting in the program to have the
operation performed automatically at a selected time.
♦
To clear a mistake, press the
STOP
key.
Initial procedure
To program a Program Key, first perform the following procedure.
After you have completed this procedure, go to the procedure for the
specific operation you want to program (see the following pages).
1
Press these keys:
The display will show:
2
Press
1
to select SET.
1:PROGRAM ENTRY MODE
1=SET, 2=CLEAR
3
Select a Program Key by pressing any
Rapid Key that has not yet been
programmed.
1
7
FUNCTION
1
(Example)
B
02
all-FO6700.book Page 132 Wednesday, August 30, 2000 1:17 PM