Filter
Top Products
Optional Settings
168
Setting 19: HEATER MODE
To conserve power, you can turn off the laser printer heater in your fax
machine. When this is done, the heater will turn on automatically
when you receive a document (there will be a slight delay before
printing while the heater warms up) and turn off when printing is
completed. Press
2
to turn off the heater, or
1
to keep it on.
♦
Initial setting: 2
Setting 20: ANTI-JUNK FAX
Press
1
to block reception from fax numbers entered in the Anti Junk
Fax List. Press
2
to allow reception from all numbers.
♦
Initial setting: 2
Setting 21: ALARM VOLUME
This sets the volume of the beep sound that alerts you to error
conditions and informs you that operations have been completed.
Press
1
for HIGH,
2
for LOW, or
3
for OFF.
♦
Initial setting: 2
Setting 22: DIAL MODE
This sets the dial mode. Press
1
if you are on a touch-tone line, or
2
if
you are on a pulse dial (rotary) line. If you have installed the dual line
option, a different mode can be selected for each line. First select the
line by pressing
1
for Line 1 or
2
for Line 2, and then press
1
for
touch-tone or
2
for pulse.
♦
Initial setting: 1
Setting 23: QUICK ON-LINE
When you transmit a multi-page document, this setting determines
whether the fax machine will dial the receiving party and begin
transmitting while scanning is still in progress, or wait until all pages
have been scanned before dialing. Press
1
to have the fax machine dial
and begin transmission while scanning is still in progress, or
2
to have
the fax machine wait until all pages have been scanned.
♦
Initial setting: 1
all-FO6700.book Page 168 Wednesday, August 30, 2000 1:17 PM