Filter
Top Products
Sending a Fax by Normal (Manual) Dialling
58
Page counter for Normal (manual) Dialling
When automatic dialling is used, a slash and the total number of pages is
automatically added to each page number on transmitted fax pages (for
example, "P. 1/5", "P.2/5", etc.). This allows the recipient to check for missing
pages.
If you wish to use this feature with Normal Dialling, you must set the total
number of pages manually. Follow the steps below.
1 Load the document(s).
2 Press , then until [PAGE COUNTER] appears in the display.
3 Press .
Display: [ENTER # (01 - 99)]
4 Enter the total number of pages (“01” to “99”) with the numeric keys.
Example: 5 pages
5 If desired, press to set the resolution and/or contrast.
6 Follow Steps 2 to 5 of the Normal Dialling procedure to send the fax.
• To cancel a batch number entry, remove the document from the feeder or
press .
• If the number of pages actually transmitted is not the same as the batch
number entered, an alarm will sound and [PAGE COUNT ERROR] will
appear in the display. “PAGE E.” will also appear in the NOTE column of the
Transaction Report if printed.
FUNCTION
RESOLUTION
STOP