Filter
Top Products
Sending a Fax by Automatic Dialling
66
Automatic redialling
If you use auto dialling (including Direct Keypad Dialling) to send a fax and the
line is busy, the machine will automatically make three redial attempts at
intervals of five minutes.
During this time, [RECALLING] will appear in the display, followed by the
attempt number.
♦ To clear the message and stop automatic redialling, press . If there
are multiple fax numbers being automatically redialled, only the number
that was attempted first will appear in the display. To cancel automatic
redialling of a different number, see Checking and cancelling stored fax
jobs on page 67.
Under certain conditions, automatic redialling may stop before three redialling
attempts are made.
STOP
Using the REDIAL key
To redial the last number dialled on the machine, press . The speaker
will be automatically activated. To fax a document, press when you hear
the fax tone after the other machine answers.
REDIAL
START
3 Check the display. If the number shown is correct, press .
• If the number is not correct, press to clear the incorrect digits, and
then re-enter the correct digit(s).
START
STOP