Filter
Top Products
Sending a Fax by Automatic Dialling
65
3. Sending
Faxes
Sending a fax by Direct Keypad Dialling
Use this method to dial a full fax number without using the handset.
1 Load the document(s).
• If desired, press to set the
resolution and/or contrast.
2 Enter the number of the receiving machine with the number keys.
• If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (four
seconds per pause). Several pauses can be entered in a row.
• If you are on a PBX and are dialing a number inside your PBX, and you
have configured the PBX CONNECTION setting for automatic connection
to an outside line (p. 106), press before entering the number.
RESOLUTION
REDIAL
R
Making a voice call with an auto-dial number
Rapid Key Dialing: Lift the handset and press the Rapid Key.
Speed Dialing: Lift the handset, press , and enter the Speed Dial
number with the number keys (the number must be 3 digits: enter “001” for
Speed Dial 1, “010” for Speed Dial 10, etc.).
Search Dialing: Press or until the name or number of the other
party appears, and lift the handset.
(You can also lift the handset first, search for the number, and then press
.)
SPEED DIAL
START