Filter
Top Products
DIS Digital Conference System User Manual
24
User Manual SW 6005 CAA ver 6.2 RevA.docx
Options 4.3.5.1
The ‘Options’ button
opens the ‘Options’
popup, which is used to
set the system operation
settings,
used when
starting the Conference.
Figure 4.3-K
Microphone
Parameters
Max. Delegate
Speakers
Set the maximum Delegates allowed. The value can
be set from 1 to 8.
Max. Open Mic
Set the maximum open conference units allowed.
This included both Delegate Units and Chairman
Units. The value can be set from 1 to 8.
Max. Speak Requests
Set the maximum no of names in “Request to
speak” queue. The value can be set from 0 to 255.
Max. Speak Replies
Set the maximum no of names in “Reply” queue.
The value can be set from 0 to 255.
Individual Mic Level
Use Delegate Setting
When ticked, the microphone level will be set
according to the setting in the ‘Delegate Seat Table’
Microphone Off Mode
Auto Off (sec)
When ticked a Conference unit will switch of after
the time set, if nobody is talking in the microphone.
Microphone Interrupt
Ability
None
Cannot interrupt another speaker.
Lower
Can interrupt a speaker with a speak priority less
than own speak priority.
Same/Lower
Can interrupt a speaker with the same speak
priority or a speak priority which is less than own
speak priority.