Filter
Top Products
DIS Digital Conference System User Manual
71
User Manual SW 6005 CAA ver 6.2 RevA.docx
Database
Selection
A user with this functionality can switch his application between two or more
systems.
Streaming
Control
With this option the user has the right to control streaming and archiving.
Delegate Votes
Status
With this option the user has the right to display the ‘Delegate Votes Status’
information on the CUA Result screen.
Controls On
Mimic
With this option the user has access to the control buttons on the mimic diagram in
the CUA.
Speaker List on
Main
With this option the user has access to the Speakers list on the CUA and on the
DC6990P (not the Request list).
Request List on
Main
With this option the user has access to the Speakers and Request list on the CUA and
on the DC6990P.
Print Vote Result
Button
With this option the user has access to a button on the voting results screen enabling
the user to print the voting result.
Microphone Parameters 4.9.1.5
This setting is used to assign individual ‘Modes’ to Users or Seats. For most applications, the ‘Operation
Mode’ is set to ‘Use CU mode’. It means that the operation mode for the users is following setting made on
the CU, i.e. if the system is running in Manual mode the Delegates will run in Manual mode.
The Standard CU modes are found in the following table:
4.9.1.5.1 Standard System setting
Operation mode
Speak priority
Interrupt ability
Chairman
Use CU mode
5
<=
Delegate
Use CU mode
1
Use CU mode
VIP
Use CU mode
2
Use CU mode
Figure 4.9-B
However for certain applications, it is desirable to assign individual operations mode, where the user will
always run in the selected mode independently of the ‘System Setting’.
4.9.1.5.2 Individual modes
Operation
Mode
Use CU mode, FIFO, Manual, Automatic, VOX, Manual+Reply,
Automatic+Reply or VOX+Reply.
See explanation of the modes in the Conference section
Speak Priority
1(Delegate), 5 (Chairman), 4, 3, 2 (VIP) or No Speaking Rights
Chairman (5) is the highest priority and the microphone will
always be turned on regardless of operation mode.
In the Request list in the CUA, a user with higher speak
priority will be placed before a user with lower speak priority.