Filter
Top Products
DIS Digital Conference System User Manual
49
User Manual SW 6005 CAA ver 6.2 RevA.docx
Ambient Microphones (AM) 4.7.4
This screen is used to
configure the Ambient
Microphone connected.
Entries are automatically
inserted by the CU Interface
application when
information about new
units is received from the
CU Central Unit.
Note: If an entry has been
created, it will not be
deleted automatically, if the
unit is not connected to the
CU anymore.
Unused units have to be
deleted manually
.
Figure 4.7-G
Units in room
Type in the Room # to filter the list to shown only units placed in the room selected.
Room #
If rooms are linked together for combining system in more room, this field is used for
identifying which room, the unit is located in. The room number is selected by use of
a drop down box, with a list of configured rooms. The available rooms are set in
Setup/Rooms/Room Configuration.
Serial #
Each unit has a unique serial number encoded into the unit from the factory.
Comments
The text ‘Inserted by CU’ with a time stamp is displayed when the unit was created
automatically by the system. The field can be used to store comments of any kind.