Filter
Top Products
DIS Digital Conference System User Manual
44
User Manual SW 6005 CAA ver 6.2 RevA.docx
Podium x
If a seat has been set to the Seat Type “Podium x” microphone, the unit on
this seat will be turned on with the “Podium x” button on the CUA. There
can be up to three different podium microphones. Podium microphones
cannot be assigned to CUA’s or DC 6990 P’s.
Secondary
seat
If a seat has been set to Seat Type ‘Secondary seat’, a delegate assigned
with a secondary user type, will change to the secondary user type when
logged in at the secondary seat.
Technician
If a seat has been marked as a ‘Technician’, a CUA application running on a
PC assigned to this seat will not be logged out, when starting a conference.
PC
The seat is attached to a PC.
Use Serial #
If delegate units connected are
sharing a microphone, this field is
used to identify the units sharing a
microphone.
In the example unit 000.167.059
is using the microphone from unit
000.167.109
Note: Chairman units as well as
portable units does not support
sharing microphone.
Note: Units sharing a microphone
has to be connected to the same
chain on the CU.
Figure 4.7-B
User Type
Specifies the default user type that applies to the CUA Application and the microphone
units when no one is logged in at the seat or a conference is not started.
Computer
Name
The computers running the CUA application are identified by their Windows computer
name. A computer name must be specified if a PC with CUA application is assigned to
the seat. It allows the PCs to send messages to each other via the network using MSMQ
and allows the CUA to control the microphone unit assigned to this seat. The field must
be left blank if no PC is attached to the microphone unit. Must be unique.
If a seat with a PC running the CUA application for a technician, this position does
normally not have a microphone assigned, t
he ‘Serial No’ can be inserted as
‘000.000.000’.
For a Technician, the fields ‘Seat type’ must be selected as ‘Technician’.
For applications running as a session on a terminal server the computer name should be
set so that terminal server and client console is identified e.g. “ServerName~3” is used
to identify a CUA running on terminal server “ServerName” and using client assigned to
console number 3.
Client must identify console number in call as well for the link to be established
between client on server and CUI.
UI on
Computer
Dropdown list to select the CUA Layout type for the Computer selected
Mic
This field is used to apply individual microphone level to a seat. The values are between
0 and -6.
LS
This field is used to apply individual speaker level to a seat. The values are between 0
and -6.