Filter
Top Products
DIS Digital Conference System User Manual
48
User Manual SW 6005 CAA ver 6.2 RevA.docx
Audio Output Units (AO) 4.7.3
This screen is used to
configure the AO Units
connected.
Entries
are automatically
inserted by the CU Interface
application when
information about new
units is received from the
CU Central Unit.
Note: If an entry
has been
created, it will not be
deleted automatically, if the
unit is not connected to the
CU anymore.
Un-used units have
to be
deleted manually.
Figure 4.7-F
Units in room
Type in the Room # to filter the list to shown only units placed in the room selected.
Room #
If rooms are linked together for combining system in more room, this field is used for
identifying which room, the unit is located in. The room number is selected by use of a
drop down box, with a list of configured rooms. The available rooms are set in
Setup/Rooms/Room Configuration.
Serial #
Each unit has a unique serial number encoded into the unit from the factory.
Function
Field, which can be used to identify the function of the unit. This description is used
to identify the units in the CUA application.
Comments
The text ‘Inserted by CU’ with a time stamp is displayed when the unit was created
automatically by the system. The field can be used to store comments of any kind.
Channel and
Volume Settings
The Channel and Volume can be set for each of the outputs at the AO unit.