Filter
Top Products
DIS Digital Conference System User Manual
57 User Manual SW 6005 CAA ver 6.2 RevA.docx
Voting Configuration 4.8.3
This screen is used to specify a
number of voting
configurations.
Voting configurations are
specified as different named
configurations
, which can be
applied when starting a voting
session.
The configurations
can be
applied to a subject i
n an
Agenda or to a C
onference as a
default configuration.
Figure 4.8-C
Voting buttons 4.8.3.1
Voting configurations can be created with 1 to 5 buttons.
A conference unit with 3 voting buttons cannot vote if a voting session is started with 4 or 5 button voting
configuration.
A label for each of the buttons to be used in CUA Application like ‘Yes’, ‘No’ and ‘Abstain’ and a colour that
is used on the mimic diagrams when displaying vote results can be specified.
When a voting session is closed the total of the different button presses are counted and stored in five
totals, which can be referred to from the Quorum, Passed and the 9 vote display column formulas.
Please note that the DIS voting units are supplied either with 3 or 5 voting buttons. The 5 voting button
configuration is standard.
4.8.3.1.1 Units with 3 voting buttons
The buttons are numbered as shown in the next figures:
1 (Total1)
This is the “Yes” button
2 (Total2)
This is the “Abstain” button
3 (Total3)
This is the “No” button
Present
The colour specified here will be used to indicate
Presence in the CUA and mimics
Cancel
This is a ‘Cancel’ button. If this is ticked, this button
will be shown on the CUA.