Filter
Top Products
DIS Digital Conference System User Manual
52
User Manual SW 6005 CAA ver 6.2 RevA.docx
Location ID
This ID is used to make cards usable only in the
installation, they are intended for. Insert a four or five
digit number identifying your installation.
If cards are delivered pre-
programmed from DIS, the
‘Location id’ is marked on the package containing the
chip cards.
File number
The entry determines where the information is place on
the card.
This field has to be set to ‘1’ (one) if the cards in use are
delivered from DIS.
After clicking [Close], you will be prompted to restart all SW 6000 applications including
the CUI.
[Program
Selected
Names]
The list to the left shows all
names in the Delegate Table.
Select the Delegate for which
a Chip Card has to be
programmed.
After selecting the Delegates,
click the button.
Note. Programming is only
possible if the CP 6000 Chip
Card reader is installed.
Figure 4.7-K
[Program Chip Card]
Click this button to program chip cards for the selected
Delegates. You will be prompted to insert the cards to be
programmed.
[Abort Programming]
Click this button to abort the programming.
[Clear List]
Click this button to un-select all selected Delegates.
[Read
Information]
Click this button to read the information on the inserted chip card.
[Clear]
Click this button to clear the chip card information fields.
[Delegate
Details
If a card is inserted in the chip card reader, the information (User Id, Login Code, Name,
Location Id) will be shown in the fields above the button. Clicking [Delegate Details] will
bring a popup showing all details about the delegate.
[Delete
Information]
Clicking this card will erase the programmed information on the card.
Delegate information in the Delegates Database will not be deleted.