Settings 75
Settings
● Export configuration settings. See “Exporting Settings” on page 108.
● Update
firmware from a file. See “Upgrading Firmware From a File” on page 60.
● Enable
standby (low power) mode (Standby Timer on Battery or USB and On AC Power). See
“Standby (Low Power) Mode” on page 46.
● Enable
TRU-Install. For information on this feature, see “TRU-Install” on page 26.
● Download
the Windows or Mac driver (if you’re using USB for data transfer). See “Making a
Tethered Connection” on page 27.
● Check for updates. See “Automatically Checking for Updates” on page 58 and “Manually
Checking for Updates” on page 59.
● Reset 3G/4
G configuration to default settings. See “Resetting the 3G/4G Configuration to
Default Settings” on page 92.
Display Panel
From the Display panel of the Device tab, you can configure settings for the device LCD.
To access this panel:
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > Display.
From this window, you can view or adjust these settings:
● Lighting of
the power button on the device (Power Button LED). See “Enabling and
Disabling the LED” on page 70.
● T
urn the LCD on or off (LCD Backlight). See “Turning the LCD On or Off” on page 69.
● LC
D timeout — how soon the LCD goes dormant (Turn Off Backlight). See “Setting the LCD
Timeout” on page 69.
● Brightness of
the LCD (Backlight Settings). See “Setting the LCD Brightness” on page 69.
microSD Card Panel
1.
Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > microSD Card.
From this window, you can view or adjust these settings, or perform the following actions:
● Status
of the microSD card slot.
● Enable the micr
oSD card slot. See “Enabling the microSD Card Slot” on page 52.
● F
older name for the shared micro SD card. See “microSD Shared Folder Name” on page 53.
● Set
up access to the microSD Card. See “Setting Up Access to the microSD Card” on page 52.