Filter
Top Products
Settings 79
Settings
● Failover wait time — How long the device should wait, after it loses the connection with the
preferred network, before it attempts to connect to the other network (not available if
WAN mode
is “3G only” or “4G only”).
●
Switchback wait time — How long the device should wait, when the less-preferred network is
connected and the preferred network becomes available, before switching to the preferred
network (not available if
WAN mode is “3G only” or “4G only”).
●
Update 3G PRL — Check whether an updated PRL is available.
The PRL (Preferred Roaming List) is an account configuration item set by your service provider.
It
controls the radio channels and network carrier used by the 3G modem. An updated PRL
may improve your 3G network service.
Note:
A 3G connection to the Internet won’t be available until the update is complete. (The 4G connection
won’t be affected.)
● Update 3G Profile — Check whether an updated profile for your 3G connection is available. An
updated profile may improve your 3G network service.
●
Manual Activation — Configure Data Link and the Mobile IP settings. (If you need help, please
contact Sprint.)
4G Panel
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click WAN > 4G.
Note:
4G information is not available if WAN mode is “3G only.” (WAN mode is in Advanced
settings > WAN > Setup
.)
From this window, you can view this 4G information:
●
Connection Status — Connected, or not connected.
●
Coverage Type — 4G, 4G Off, or no service.
●
RSSI and CINR.
RSSI reflects the signal strength of the network.
CINR stands for Carrier to Interference-plus-Nois
e Ratio, and is a measurement of signal
effectiveness. For the receiver to decode the carrier signal, the latter must be in an acceptable
CINR range.
●
Tx Power — Transmitter power. A higher number is better.
●
Center Frequency — Frequency of the 4G channel used for the data connection.
●
NSP-ID — ID of the 4G Network Service Provider.
●
NAP-ID — ID of the 4G Network Access Provider.
●
BSID — Base Station ID.