Filter
Top Products
76 Settings
Sounds Panel
From the Sounds panel of the Device tab, you can enable or disable sounds for specific types of
events.
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > Sounds.
4. Next to each of the event types, select Enable or Disable.
Sounds for the following events
can be individually enabled or disabled:
●
Low Battery — Useful as a reminder to charge the device. In the Alert When list, you can select a
battery level to trigger the alert.
●
System Alerts — When you hear the device beep, use the device LCD or the Alerts window to get
information about the alert. See “Alert Information” on page 43.
Note:
System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Routing hardware settings reset
• Device startup failure
● Internet Connected
● Internet Disconnected
● Wi-Fi User Has Joined — Useful, for example, if you’re the only one using the device, to detect an
intruder.
●
Wi-Fi User Has Left
● Last User Has Left — You can turn the device off if nobody will be using it for a while.
About Panel
To view information about your device:
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > About.
Note:
4G information is not available if WAN mode is “3G only.” (WAN mode is in Advanced
settings > WAN > Setup
.)