Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthroughan RS-232serialinterface
91 smarttech.com/kb/170401
Field Definitions
Field Possible Values Description
current displayhour l 0 ~ 20000 Current Display hours.
target testpattern l = ? Set the test pattern to pattern number X (1~4). If
only one test pattern, call it test pattern 1.
current testpattern l 1: Grid
l 2: RED
l 3: Green
l 4: Blue
l 5: Grey
l 6: Black
Current test pattern being displayed. Just return
the test pattern number is OK. The built-in test
pattern may be changed.
target colorwheelidx l = ??? The ranges must match the OSD ranges
current colorwheelidx l ??? The ranges must match the OSD ranges
current failurelog l normal
l overtemp
l fanlock
l fanDMD
l fanblower
l fansystem
l lamperror
l colorwheelbreak
l lampignite
l lampoverheat
l lampdriver
l lampoverhours
Current error state that the projector is in. The
modes are projector dependant.
Current error# Provide the details of
the specific error. ‘#’ is
the number recorded in
the log. It ranges from 1
to 5. 1 indicates the
most recent error and 5
indicates the oldest
error.
The details include the failure reason, system
hours, lamp hours, sensor temperature and lamp
voltage. For example: error1=fansystem,
syshrs:1000, lamphrs=1000, temp=60,volt=120.
error2=lampoverheat, syshrs:3000,
lamphrs=2900, temp=150,volt=120.
target factoryreset l = true
l = false
If set to true, perform a factor reset. Otherwise
do nothing.