Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthroughan RS-232serialinterface
72 smarttech.com/kb/170401
Field Possible values Description
target usb2source l = VGA1
l = HDMI1
l = Disabled
Value to set the usb2 switch enabled source to.
Note that this can not be the same as the
usb1source. If it is, USB1 will be used and
USB2 is ignored.
Example:
> set input=vga1
input = vga1
> set input=next
input = composite
> get videoinputs
videoinputs = vga1, composite, hdmi1
> get usb1source
usb1source = vga1
> get usb2source
usb2source = hdmi1
> set usb2source = hdmi1
usb2source = hdmi1
>
Video Control
Video output related controls. The range of values used for these commands should match the range
displayed visually on the OSD. The firmware must handle videofreeze and videomute states
correctly. A change should be made to ensure that videofreeze and videomute are mutually
exclusive.