Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthroughan RS-232serialinterface
92 smarttech.com/kb/170401
Field Possible Values Description
current factoryreset l = true
l = false
Set to true only if a factor reset is about to occur.
target highspeedfan l = high
l = normal
The ranges must match the OSD ranges
current highspeedfan l high
l normal
The ranges must match the OSD ranges
current statereporting l on
l off
Current state reporting value
target statereporting l = on
l = off
State reporting value desired.
current poweroverride l on
l off
Power override forces the projector to remain in
the ON state when the command is received.
This command is NOT persistent and does not
get stored to non-volatile memory (cleared on
power cycle).
When this mode is enabled, the power button on
the remote and the ECP must not turn off the
projector.
This command must also be added to the
service menu so the user can disable it via the
OSD.
target poweroverride l = on
l = off
Value to set the power override to.