SMC Networks SMC2586W-G Network Card User Manual


 
SNMP
Fig. 59 SNMP settings.
The SNMP (Simple Network Management Protocol) functionality can be dis-
abled, and you can specify the name (used as a password) of the read-only
and read-write community. In addition, up to 5 SNMP trap targets can be set
in the SNMP Trap Table.
To specify a trap target:
1. Type the IP address of the target host.
2. Type the Community for the host.
3. Select the corresponding check box next to the IP address text box.
4. EliteConnect Management Utility
48