Filter
Top Products
5. Monitor the progress of the command in the History Log View.
6. See the results of the command in the History Log View and in the Status
column of the Device List View.
NOTE: You have to make sure a device is reachable by EliteConnect
Management Utility through the IP address/domain name and port specified
in the device list.
Canceling Batch Command Execution
Fig. 104 Cancel Waiting Commands menu command.
When a network batch command is in execution, you can click Cancel
Waiting Commands on the Device menu to cancel all commands waiting in
EliteConnect Management Utility’s work queue.
After the currently in-action commands complete or fail, all waiting com-
mands are canceled.
NOTE: Depending on the HTTP behavior parameters specified on the HTTP
tab of the Op-tions dialog box, you may wait a long period before the waiting
commands are canceled (see Section 4.3.2.4.4 for more information).
Checking Whether Devices Are Alive
To check whether the selected devices are alive, carry out the Check Alive
command.
If the Status column shows “Alive” after the device management command
is completed, the MAC Address, Firmware, Up Time, and Model columns also
show system information about the device.
Configuring a Device by Web Browser
To configure the selected device by Web browser, carry out the Configure by
Web Browser command.
80