Filter
Top Products
Sending the Active Device List to Others by E-mail
The active device list can be sent to others by e-mail. Click Send on the File
menu to do this.
Appendix A: Default Settings
TIP: Press the Default button on the powered-on SMC2586W-G to reset the
configuration settings to factory-default values.
Appendix B: Troubleshooting
Check the following first:
• Make sure that the power of the SMC2586W-G is on and the Ethernet
cables are con-nected firmly to the RJ-45 jacks of the SMC2586W-G.
• Make sure that the LED ALV of the SMC2586W-G is blinking to indicate
the SMC2586W-G is working.
• Make sure the types of the Ethernet cables are correct. Recall that there
are two types—straight-through and crossover.
Wireless Settings Problems
•The wireless client computer cannot associate with an SMC2586W-G.
• Is the wireless client set in infrastructure mode?
• Check the operating mode of the WLAN NIC.
• Is the SSID of the WLAN NIC identical to that of the prospective
SMC2586W-G?
•Check the SSID setting of the WLAN NIC and of the SMC2586W-G.
• Is the WEP functionality of the prospective SMC2586W-G enabled?
85