Filter
Top Products
SonicWALL UMA EM5000 Getting Started Guide Page 29
8. When finished entering the database parameters, click
Next.
9. In the Other Configuration page, the fields vary depending
on the selected role, as follows:
• Gateway Parameters – Required for All in One,
Console, and Agent roles
• Syslog Server Parameters - Required for All in One,
Console, Agent, and Syslog Collector roles
• SMTP Parameters - Required for All in One and
Console roles
Enter the GMS Gateway IP address and connection
password, if you are using a GMS gateway. Leave these
fields empty if you are using HTTP/HTTPS to connect to
the managed appliances.
10. In the Syslog Server Port field, type in the port used for
receiving syslog messages or accept the default of 514.
11. For access to email on this system, including the ability to
send email alerts, type the mail server IP address into the
SMTP Server field and enter valid email addresses for the
Sender Address and Administrator Address.
12. Click Next.
13. In the Summary page, verify that all parameters are
correct. Click Back to make changes on a previous screen,
or click Apply to accept the settings.