Filter
Top Products
SonicWALL UMA EM5000 Getting Started Guide Page 55
6. Enter the desired interval for sending heartbeats to the
SonicWALL GMS server, in seconds, in the Heartbeat
Interval (seconds) field. The maximum heartbeat interval
is 86400 (24 hours).
7. Click Accept.
Adding a SonicWALL SSL-VPN 2000 to SonicWALL
GMS
To add your appliance to the SonicWALL GMS system, perform
the following steps:
1. Log in to the SonicWALL GMS management interface.
2. Click the SSL-VPN tab at the top of the management
interface.
3. Expand the SonicWALL GMS tree and select the group to
which you will add the SonicWALL appliance. Then, right-
click the group and select Add Unit from the pop-up menu.
To add the appliance independently from any group, right-
click an open area in the left pane and select Add Unit.
The Add Unit dialog box appears.
4. Enter a descriptive name for the SonicWALL SSL-VPN
appliance in the Unit Name field.
5. Enter the SonicWALL SSL-VPN appliance serial number in
the Serial Number field. The serial number can be found in
the SonicWALL SSL-VPN management interface under
System > Status.
6. To specify the IP address of the SonicWALL SSL-VPN
appliance, select the Specify manually radio button for
Managed Address, and type the IP address into the field.
7. Enter the SonicWALL SSL-VPN appliance administrator
login name in the Login Name field.
8. Enter the appliance administrator password in the
Password field.
9. The radio button next to Using HTTPS is automatically
selected.
10. If the SonicWALL UMA EM5000 uses a custom HTTPS
port number, type it into the HTTPS Port field.
11. If a different SonicWALL UMA EM5000 appliance or host
server will be the Agent for managing the SonicWALL
SSL-VPN, type the IP address of that system into the
Agent IP Address field.
12. If your deployment includes a Standby Agent, type its IP
address into the Standby Agent IP field.
13. To add this SonicWALL SSL-VPN appliance to SonicWALL
GMS monitoring, select the Add this unit to Net Monitor
checkbox.
14. Click OK.
It may take up to a minute for the data to load.