Filter
Top Products
Page 6 System Requirements
SonicWALL Platform and Firmware Support
Legacy or older-generation models are not supported, such as,
SonicWALL XPRS/XPRS2, SonicWALL SOHO2, SonicWALL
Tele2, and SonicWALL PRO-VX.
For the most recent platform support and firmware version
information, refer to the latest SonicWALL UMA EM5000
Getting Started Guide available at:
http://www.sonicwall.com/us/Support.html
Non-SonicWALL Appliance Support
The SonicWALL UMA EM5000 provides monitoring support for
non-SonicWALL TCP/IP and SNMP-enabled devices and
applications.
Network Requirements
To complete the SonicWALL UMA EM5000 deployment
process, the following network requirements must be met:
• Access to the Internet
• A static IP address
• Network connection must be able to accommodate
1 KB/s for each device under management. For example,
if the SonicWALL UMA EM5000 is monitoring 100
SonicWALL appliances, the connection must support at
least 100 KB/s.
Depending on the configuration of SonicWALL log settings and
the amount of traffic handled by each device, the network traffic
can vary dramatically. The 1KB/s for each device is a general
recommendation. Your installation requirements may vary.
SonicWALL
Platforms
SonicWALL Firmware Version
Firewall / UTM / VPN
TZ Series
NSA Series
PRO Series
SonicOS Enhanced 3.2 or newer
SonicOS Standard 3.1or newer
SonicWALL CSM
Series
SonicOS CF 2.0 or newer
Secure Remote Access
SonicWALL SMB
SSL-VPN Series
SonicOS SSL-VPN 2.0 or newer
SonicWALL Aventail
Series
Aventail 9.0 or newer
Backup and Recovery
SonicWALL CDP
Series
SonicWALL CDP 2.3 or newer