Filter
Top Products
22
Chapter 2 Menus
Basic Menu Operations
PHASE
INPUT
1
2
3
Del
4
5
6
0
7
8
9
Ent
Basic Menu Operations
Menu Operation Buttons
The menus are operated using the menu operation
buttons on the front panel.
The functions of the menu operation buttons are
described below.
1 Numeric keypad
2 Ent button
3 Del button
5 MENU button
6 UP and DOWN buttons
7 ENTER button
Menu Operation
This section describes how to display the desired menu
(or reach the desired menu level) and how to make
adjustments and settings you wish.
To display the desired menu, proceed as follows.
1 Press the MENU button 5.
The main menu is displayed.
2 Using the UP and DOWN buttons 6 or PHASE
knob 4, move the cursor to the desired item.
(Example: select the SET UP menu by pressing the
DOWN button.)
C ONTROL PRESET ADJ...
MENU
C OLOR TEMP ADJ...
SET UP...
M EMORY CARD...
C OPY...
S TATUS...
M AINTENANCE...
KEYPROTECT OFF
p
3 Press the ENTER button 7.
The level 1 display of the selected menu appears.
I NPUTCONFIGURATION...
SET UP
R EMOTE...
P ASSWORD...
S YSTEM CONFIGURATION...
ON SCREEN SET...
A LIGNMENT...
E XTEND MENU
p
...
Cursor
Main menu
Button Function
5MENU button Displays the main menu or brings you
back to an upper menu level. (When
on the main menu, switches back to
the normal picture display.)
6UP button Moves the cursor upward. In setting
mode, increases the setting and
adjustment values.
6DOWN button Moves the cursor downward. In setting
mode, decreases the setting and
adjustment values.
4PHASE knob By turning this knob clockwise, the
cursor moves upward. In setting mode,
increases the setting and adjustment
values (same function as UP button).
By turning this knob counterclockwise,
the cursor moves downward. In setting
mode, decreases the setting and
adjustment values (same function as
DOWN button).
2Ent button Confirms the current selection of
7ENTER button menu item/setting.
3Del button Deletes the values and characters
entered.
1Numeric keypad Enters numerical values.
UP MENU
DOWN
ENTER
4 PHASE knob