Filter
Top Products
23
Chapter 2 Menus
4 Repeat steps 2 and 3 until the desired menu is
displayed.
On how to make adjustments and settings on the menu
thus displayed, see the following descriptions.
E ...
A PERTURE OFF
VALUE 100
10CH
I NPUT CONFIGURATION ↑↓
F ORMAT... NTSC-7 .5
S LOT NO 2
I NPUT NO 1
YC SEP3LINES COMB
S YNC MODE INT
S CREEN MODE... 4:3-NORM
S AFE AREA OFF
SCAL 80%
p
To abort menu operation
Press the MENU button. The screen display switches
back to that of the upper menu level, or to the normal
picture display.
The setting or adjustment being performed is canceled,
and data loading or saving is aborted.
If “NG” or “ERROR” appears during menu operation
Press the MENU button. This brings you back to the
initial display of the current menu.
Choosing one of two or more selections
Selecting in yellow text
1 Using the UP and DOWN buttons or PHASE knob,
move the cursor to the desired item and press the
ENTER or Ent button.
The selected item is displayed in yellow text,
which indicates that the monitor is now in setting
mode for that item.
SCALE...
A PERTURE OFF
VALUE 100
10CH
I NPUT CONFIGURATION ↑↓
F ORMAT... NTSC-7 .5
S LOT NO 2
I NPUT NO 1
YC SEP3LINES COMB
S YNC MODE INT
S CREEN MODE... 4:3-NORM
S AFE AREA OFF
80%
p
2 Using the UP and DOWN buttons or PHASE
knob, change the setting.
3 Press the ENTER or Ent button.
The setting is confirmed (the item is displayed in
white text again).
Selecting from a setting list
1
Using the UP and DOWN buttons or PHASE knob,
move the cursor to the desired item in the setting list.
SCREEN MODE
4 :3-NORM
4 :3-UNDR
1 6:9-NORM
1 6:9-UNDR
p
2 Press the ENTER button.
The setting is confirmed, and the screen display
returns to that of the upper menu level.
Entering a numerical value
1 Using the UP and DOWN buttons or PHASE
knob, move the cursor to the desired item and press
the ENTER or Ent button.
The selected item is displayed in yellow text,
which indicates that the monitor is now in setting
mode for that item.
SCAL
E
...
A PERTURE OFF
VALUE 085
10CH
I NPUT CONFIGURATION ↑↓
F ORMAT... NTSC-7 .5
S LOT NO 2
I NPUT NO 1
YC SEP3LINES COMB
S YNC MODE INT
S CREEN MODE... 4:3-NORM
S AFE AREA OFF
80%
p
(Continued)
Enter numerical
values.
[ ↓ ] indicates that
the menu
continues onto
next page.
[ ↑ ] indicates that
the menu is
continued from
previous page.
Select from
various options.
Indicates that
selecting this
item brings you
to a lower menu
level.