Filter
Top Products
37
Chapter 2 Menus
[C16] COLOR TEMP menu
Select STD, COL1, COL2, or CH SET.
STD: Use common data (factory setting: D65).
COL1: Use common data (factory setting: D93).
COL2: Use common data (factory setting: D56/
D65
1)
).
CH SET: Use data for the current channel (factory
setting: D65).
[C17] COPY menu
Select the source to be copied from.
OTHER CH: Copy data from another channel.
Enter the channel number.
When the input channel number is deleted with
the Del button. the number “1” appears instead.
Restore the previous setting by pressing the
MENU button, then re-enter the channel number.
(Setting with the UP/DOWN buttons or PHASE
knob is possible without pressing the MENU
button.)
OTHER MONITOR...: Copy data from another
monitor. ÷ [C171]
MEMORY CARD...: Copy data from a memory
card. ÷ [C172]
[C171] OTHER MONITOR menu
Enter the address of the monitor from which to copy
data.
MONITOR ADDRESS: Enter the address of the
monitor from which to copy data. ÷ [C1711]
[C1711] MONITOR ADDRESS menu
Select which channel of the chosen monitor from
which to copy data. ÷ Copy is carried out.
CH NO: Enter the channel number.
When the input channel number is deleted with
the Del button. the number “1” appears instead.
Restore the previous setting by pressing the
MENU button, then re-enter the channel number.
(Setting with the UP/DOWN buttons or PHASE
knob is possible without pressing the MENU
button.)
[C172] MEMORY CARD menu
Select the file name. ÷ [C1721]
...........................................................................................................................................................................................................
1) D56: BVM-20F1U/20E1U/14F1U/14E1U/14F5U/14E5U
D65: BVM-20F1E/20E1E/14F1E/14E1E/14F5E/14E5E
[C1721] MEMORY CARD menu
Select which channel of the chosen file from which to
copy data. ÷ Copy is carried out.
CH NO: Enter the channel number.
When the input channel number is deleted with
the Del button. the number “1” appears instead.
Restore the previous setting by pressing the
MENU button, then re-enter the channel number.
(Setting with the UP/DOWN buttons or PHASE
knob is possible without pressing the MENU
button.)