Filter
Top Products
48
Chapter 2 Menus
Overview
The following 4 functions can be executed with the
EXTEND menu.
(1)Restore factory default data for installed boards.
(2)Write monitor setting and adjustment data to the
BKM-12Y monitor memory card or read setting
and adjustment data from the card.
Using Extended Functions — EXTEND MENU
(3)Restart the monitor.
(4)Automatically adjust the setup level and 100 IRE
level of the internal white signal which is used in
the COLOR TEMP ADJ menu [B].
Structure of the SET UP Menu [C] / EXTEND Menu [C7]
C7111
INPUT CONFIGURATION C1
REMOTE C2
PASSWORD C3
SYSTEM CONFIGURATION C4
ON SCREEN SET C5
ALIGNMENT C6
EXTEND MENU C7
ENTER PASSWORD
C71
RE-LOAD FACTORY
DATA C711
SLOT1 CONTROL
SLOT2 SDI 4:2:2/4 FSC
1)
SLOT6 VIDEO AMP
SLOT7 DEFLECTION
SLOT9 POWER
SUPPLY
MEMORY CARD
C712
BACK UP SYSTEM
DATA C7121
RE-STORE SYSTEM
DATA C7122
Confirmation
message
2)
Confirmation
message
3)
RE-START MONITOR
C713
ADJ INT SIGNAL
C714
Level 1 Level 2 Level 3 Level 4 Level 5
1) This is displayed when the BKM-21D is installed in the SLOT 2.
2) A message appears, requiring your confirmation. If you select
OK, data is reset and the monitor is automatically turned off and
on again. If you select CANCEL, then you will be back in the
RE-LOAD FACTORY DATA menu [C711].
3) A message appears, requiring your confirmation. If you select
OK, data is read out from the monitor memory card. If you
select CANCEL, then you will be back in the MEMORY CARD
menu [C712] .