Filter
Top Products
1-6
Connecting the AC power cord ________________
Plug the fax into a 200–240 volt AC 50/60 Hz outlet.
1 Plug the power cord connector into the rear of the fax.
2 Plug the other end of the power cord into a properly grounded AC power outlet.
n
There is no power switch on the fax. The power is on as long as the fax is plugged in.
Setting the language and country _____________
When you plug in the fax for the first time, you need to select the correct language for the LCD
display and reports, and the country* of use. See pp. 2-2, 2-3 for the buttons on the operation panel.
1 Press [Start/Copy].
2 Use [3] or [4] to select the preferred language for the LCD display and reports.
▼
Press [Start/Copy].
Wait a second for COUNTRY SELECT* to appear.
▼
Press [Start/Copy].
OTHERS
3 Use [3] or [4] to select the country where you are using the fax*.
▼
Press [Start/Copy].
Registration ends and the fax enters standby mode.
* This setting is only available for some countries.