Filter
Top Products
7-12
1 Press [Function].
▼
Press [Start/Copy].
USER SETTINGS
2 Use [3] or [4] to select TAM SETTINGS.
▼
Press [Start/Copy].
MESSAGE LENGTH
3 Use [3] or [4] to select FWD SETTINGS.
▼
Press [Start/Copy].
OFF
4 Use [3] or [4] to select ON.
▼
Press [Start/Copy] twice.
TEL=
5 Use the numeric buttons to enter the forwarding number.
A maximum of 40 digits can be entered.
▼
Press [Start/Copy].
6 Press [Stop].
Setting ends and the fax returns to standby mode.
This feature allows you to automatically forward telephone messages, recorded when the fax is set
to TAM MODE, to a registered forwarding number.
You can use remote control to access the forwarding number and listen to your telephone messages.
n
•You must register a forwarding number and set TAM MODE before you can use this feature. Remote
control cannot be used to set this feature unless a forwarding number has been registered.
• If you set FWD SETTINGS to ON when a forwarding message has not been recorded, you will hear
a tone instead of a forwarding message when telephone messages are forwarded.
Setting the forwarding number ________________
Forwarding telephone messages