Filter
Top Products
5-10
■ Setting the options for automatic redialling
You can set the following options for automatic redialling:
•Whether or not the fax redials automatically.
• The number of times the fax attempts to redial.
• The time interval between redialling attempts.
1 Press [Function].
▼
Press [Start/Copy].
USER SETTINGS
2 Use [3] or [4] to select TX SETTINGS.
▼
Press [Start/Copy].
ECM TX
3 Use [3] or [4] to select AUTO REDIAL.
▼
Press [Start/Copy].
•To disable automatic redialling, use [3] or [4] to select OFF, then press [Start/Copy]. Press [Stop] to
return to standby mode.
•To enable automatic redialling, use [3] or [4] to select ON and continue with the steps below.
ON
4 Press [Start/Copy] twice.
2TIMES
5 Use the numeric buttons to enter the number of times you want the fax to redial.
You can select from 1 to 10 times (see p. 8-3).
▼
Press [Start/Copy] twice.
2MIN.
6 Use the numeric buttons to enter the time interval between redialling attempts.
You can select from 2 to 99 minutes (see p. 8-3).
▼
Press [Start/Copy].
7 Press [Stop].
The fax returns to standby mode.