Filter
Top Products
8-4
* Only available in some countries.
RX REDUCTION
FIXED REDUCTION
REDUCE DIMENSION
PAPER SIZE
Enable/disable reduction for received documents.
Select the reduction rate.
Select reduction in height only or both width and height.
Select the size of the loaded fax paper.
ON/OFF
STANDARD/
A4➝LTR/
LGL➝LTR
VERTICAL ONLY/
HORIZ & VERTICAL
A4/LTR/LGL
PRINTER SETTINGS
Name Description Settings
RX SETTINGS
Name Description Settings
ECM RX
FAX/TEL AUTO SW
RING START TIME
F/T RING TIME
DEFAULT ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
CALLER ID*
Enable/disable error correction during reception.
Enable/disable FAX/TEL switchover. When ON, this feature
answers calls, and if no fax tone is detected, the fax rings to
alert you of an incoming call.
Set the duration that the fax listens for a fax tone before
starting to ring.
Set the length of time the fax will ring to alert you of an
incoming call.
Select the action taken after the F/T RING TIME expires.
When the handset or an extension phone is connected, set
the fax to ring when it receives a call.
Set the number of incoming rings before the fax answers.
Determine if the fax switches to document receive mode
after the fax rings for a specified time when the fax is in the
manual receive mode.
Set the amount of time the fax will ring before switching to
document receive mode.
Enables/disables remote receiving.
If you set REMOTE RX to ON, you can select the remote
receiving ID.
Turn on/off memory receiving of a document.
Determine if the fax displays the caller’s name and fax
number when receiving a call.
ON/OFF
8 seconds (0 to 30)
22 seconds (10 to 60)
DISCONNECT/RECEIVE
ON/OFF
2 times (1 to 99)
ON/OFF
15 seconds (1 to 99)
ON/OFF
25 (00 to 99)
ON/OFF
ON/OFF