Filter
Top Products
5-13
SENDING DOCUMENTS
5
Sending a document to more than
one location ___________________________________
Sequential broadcasting sends one document to more than one location.
You can send to a total of 60 locations as follows:
• One-touch speed dialling = 9 locations
• Coded speed dialling = 50 locations
•Regular dialling (Numeric buttons dialling) = 1 location
You can enter the one-touch speed dialling and coded speed dialling locations in any order. You
simply press the one-touch speed dialling button, or press [Coded Dial/Directory] followed by the
two-digit code.
You can also include one location using regular dialling. Remember that when using regular
dialling, you must press [Start/Copy] after entering the number.
n
You must press each button within 10 seconds of the preceding one. The fax begins the operation
approximately 10 seconds after you press the last button.
Sequential broadcasting
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2 Dial the receiving party’s fax numbers as you need.
You can also press [Redial/Pause] to redial the last number dialled with the numeric buttons.
TEL= 34567890
3 Press [Start/Copy].
• The fax reads the document into memory and begins sending.
•To cancel a transmission, press [Stop] during dialling or transmission. All transmissions in the
sequence are cancelled.