Filter
Top Products
8-8
Activity report _________________________________
Summarises the information for the sending and receiving activities of your fax after 20
transactions. For automatic printing, see ACTIVITY REPORT, p. 8-3.
Transactions in an activity report are listed chronologically.
One-touch speed dialling list __________________
Lists the numbers and names registered under one-touch speed dialling buttons.
Coded speed dialling list ______________________
Lists the numbers and names registered under coded speed dialling codes.
User’s data list _________________________________
Lists the current settings of the fax and the registered sender information.
Doc. memory list ______________________________
Lists the documents currently stored in the fax’s memory (see p. 5-14).
TX (Transmission) report_______________________
You can set the fax to print an activity report every time you send a document. See TX REPORT,
p. 8-3.
RX (Reception) report __________________________
Normally the fax does not print an activity report for receiving, but you can set the fax to print an
activity report every time you receive a document. See RX REPORT, p. 8-3.
You can set the fax to print an activity report only when an error occurs during receiving. See RX
REPORT, p. 8-3.
Multi TX/RX (Transaction) report ______________
Lists the result of a sequential broadcasting.
If you set the fax to print activity reports (TX REPORT or RX REPORT) and then use sequential
broadcasting, a MULTI TX/RX REPORT will be printed instead of a TX (Transmission) REPORT.
See TX REPORT, p. 8-3.
n
A memory clear report is printed automatically when power is restored after a power failure. See
Memory clear report, p. 9-19.